4.16 Touch Pad 4 Replacement Procedures
3. Remove the Touch Pad with the bracket and by lifting it gently.
Figure 4-48 Removing the Touch Pad
Installing the Touch Pad
To install the Touch Pad, follow the steps below and refer to the figures in the preceding
section:
1. With the top cover upside down, place the Touch Pad and the Track Pad bracket in
position.
2. Secure the Touch Pad bracket with five M2.5x3 screws.
3. Connect the Touch Pad FFC cable to the Touch Pad.
Satellite P200
/ P205
Series Maintenance Manual
[CONFIDENTIAL]
4-43
To Next Page
Loading...
