4 Replacement Procedures 4.19 Subwoofer Unit and USB Board
4.19 Subwoofer Unit and USB Board
Removing the Subwoofer Unit and USB Board
To remove the subwoofer unit and USB board, first remove the battery pack, keyboard, and
top cover, and then follow the steps below:
1. Remove the two screws securing the subwoofer unit to the chassis.
Figure 4-54 Removing the subwoofer screws
2. Remove the USB board cable and subwoofer cable.
Figure 4-55 Disconnecting the USB board cable and subwoofer cable
4-48
[CONFIDENTIAL]
Satellite P200
/ P205
Series Maintenance Manual
To Next Page
Loading...
