4 Replacement Procedures 4.6 Expansion Memory
4.6 Expansion Memory
Removing the Expansion Memory Module
To remove the memory module, make sure the computer is in boot mode. Remove the battery
pack, cables and any optional devices before you start and then follow these steps:
1. Release the black captive screw M2.5x6.5 screw securing the memory module socket
cover.
Figure 4-16 Releasing the cover screw
2. Slide your fingernail or a thin object under the cover and lift it off.
Figure 4-17 Removing the expansion memory module cover
4-18
[CONFIDENTIAL]
Satellite P200D/P205D Series Maintenance Manual
To Next Page
Loading...
