4 Replacement Procedures 4.11 Display Assembly
4.11 Display Assembly
Removing the Display Assembly
To remove the display assembly, first remove the battery, keyboard, and any optional devices.
Then follow the steps below:
1. Disconnect the LVDS cable (JP4), function button board cable (JP15), wireless LAN
antennas, CMOS cable (JP11), and microphone cable (JP16) from the system board.
JP15
JP4
JP11
JP16
Figure 4-30 Disconnecting cables
4-30
[CONFIDENTIAL]
Satellite P200D/P205D Series Maintenance Manual
To Next Page
Loading...
