4.22 System Board 4 Replacement Procedures
4.22 System Board
Removing the System Board
To remove the system board, first remove the battery pack, keyboard, display assembly, top
cover, and VGA PCB, then follow the steps below:
1. Remove the two M2.5x4 screws securing the system board.
Figure 4-64 Removing the system board screws
2. Remove the DC connector from its socket.
Figure 4-65 Removing the DC power cable
Satellite P200D/P205D Series Maintenance Manual
[CONFIDENTIAL]
4-55
To Next Page
Loading...
