4.23 VGA Board 4 Replacement Procedures
4.23 VGA Board
Removing the VGA Board
To remove the VGA board, you have to first remove the battery pack, keyboard, top cover,
and system board. Then follow the steps below:
1. Turn the system board over and remove the three M2.5x4 screws securing the VGA
board.
Figure 4-67 Removing the VGA board screws
2. Remove the VGA board from the system board.
Figure 4-68 Removing the VGA board
Satellite P200D/P205D Series Maintenance Manual
[CONFIDENTIAL]
4-57
To Next Page
Loading...
