4 Replacement Procedures 4.28 Camera and Microphone
4.28 Camera and Microphone
Removing the Camera and Microphone
To remove the camera and microphone, first remove the display assembly and display mask,
then follow the steps below:
1. Remove the CMOS cable (JP11) from the camera module.
Figure 4-86 Removing the CMOS cable
2. Remove the camera module by gently peeling it away from its adhesive backing.
Figure 4-87 Removing the camera module
4-70
[CONFIDENTIAL]
Satellite P200D/P205D Series Maintenance Manual
To Next Page
Loading...
