Error! No text of specified style in document. Error! No text of specified style in document. 4
Replacement Procedures
4.25 Antennas
Removing the Antennas
Remove the antennas according to the following procedures and Figure 4.41.
1. Pull the antennas out from the routing channel on the LCD cover assembly.
2. Carefully peel the antennas from the LCD cover assembly.
Figure 4.41 Removing the antennas from the LCD cover assembly
Installing the Antennas
NOTE: Take care not to pinch the antenna cables. Make sure the routing positions of the
antennas are correct and do not block any components, such as screw holes.
Satellite P770/P775 Series Maintenance Manual [CONFIDENTIAL] 4-55
To Next Page
Loading...
