2 Troubleshooting Procedures
Satellite P770/P775 Series Maintenance Manual
8
Other problems that are not covered by the diagnostics program may be discovered by a
user.
1. If an error is detected when using an external USB device, perform the External USB
Devices Troubleshooting procedures in Section 2.6
2. If an error is detected when using the TV-out connection, perform the TV-Out Failure
Troubleshooting procedures in Section 2.7
3. If an error is detected when using the Wireless LAN, perform the Wireless LAN
Troubleshooting procedures in Section 2.11
4. If an error is detected when using the camera, perform the camera Troubleshooting
procedures in Section 2.12
5. If an error is detected when using the Bluetooth, perform the Bluetooth
Troubleshooting procedures in Section 2.13
6. If an error is detected when using the Bridge Media slot, perform the Bridge Media
slot Troubleshooting procedures in Section 2.14
7. If an error is detected when using the CRT, perform the CRT failure troubleshooting
procedures in Section 2.16.
8. If an error is detected when using the HDMI TV, perform the HDMI CEC
troubleshooting procedures in Section 2.17.
9. If an error is detected when using the MIC, perform the MIC troubleshooting
procedures in Section 2.18
10. If an error is detected when using the USB3.0, perform the USB3.0 troubleshooting
procedures in Section 2.19
11. If an error is detected when using the Sleep charge, perform the Sleep & Charge
troubleshooting procedures in Section 2.21
12. If an error is detected when using the CIR, perform the CIR troubleshooting
procedures in Section 2.22
13. If an error is detected when using the Sleep & Play music, perform the Sleep & Play
music troubleshooting procedures in Section 2.23
14. If an error is detected when using the Wimax, perform the Wimax troubleshooting
procedures in Section 2.24
15. If an error is detected when using the JET, perform the JET troubleshooting
procedures in Section 2.26
16. If an error is detected when using the Ambient Light Sensor, perform the Ambient
Light Sensor troubleshooting procedures in Section 2.27