3D Viewer
This feature displays a 3D object on the screen which moves in according
to tilting or vibration of the computer.
When HDD Protection detects computer vibration the HDD head is parked
and the 3D object disk rotation stops. When the head is un-parked the disk
begins to rotate again.
Click 3D Viewer button to start.
This 3D object virtually represents the computer's internal HDD. This
representation might vary from the actual number of disks, disk
rotation, head movement, part size, shape and direction.
This feature might use a large amount of CPU and memory on some
models. The computer might become slow or sluggish when
attempting to run other applications while the 3D Viewer is displayed.
Intensely shaking the computer or other subjecting it to strong impacts
might damage the computer.
TOSHIBA Setup Utility
TOSHIBA Setup Utility is a BIOS setup utility that provides you a menu-
based user interface so that you can easily view and change BIOS
settings.
To enter the BIOS setup utility, do the following:
1. Save your work.
2. Click Start. Point to the arrow ( ) beside the Shut down button and
then select Restart.
3. Hold down the F2 key and then release this key one second after the
computer is power on.
To save the changes and exit the utility, press the F10 key and proceed by
selecting Yes or select Exit -> Exit Saving Changes -> Yes. The
computer restarts immediately.
System Recovery
There is a hidden partition allocated on the internal storage drive for the
System Recovery Options in the event of a problem.
You can also create recovery media and restore the system.
The following items are described in this section:
Creating Recovery Media
Restoring the pre-installed software from your created Recovery
Media
Restoring the pre-installed software from the Recovery Solid State
Drive
User's Manual
5-12
To Next Page
Loading...
