105
Utilities
System Settings
❖ Display—Allows you to change various default settings
for the built-in display
When the computer restarts, it remembers the last
configuration. If data does not appear on the display you
are using after starting in Sleep mode, press the
Windows () + P keys to toggle the display. For more
information, see “Directing the display output when you
turn on the computer” on page 60.
❖
General—Allows you to view the current BIOS version
or change certain settings back to their default values
❖
Keyboard—Allows you to access the wake-on
keyboard function, or to configure the function keys
❖
SATA—Allows you to set conditions for SATA
❖
USB—Allows you to enable CDP (Charging Downstream
Port) to use rapid USB charge while the computer is
powered On
❖
Sleep Utilities—Allows you to enable or disable Sleep
and Charge
NOTE
To Next Page
Loading...
