110
Mobile Computing
Changing the main battery
5.375 x 8.375 ver 2.3.2
When your main battery has run out of power, you have two
options: plug in the AC adapter or install a fresh main battery.
TECHNICAL NOTE: To avoid losing any data, save your files
and then either completely shut down your computer or put it
into Hibernation mode before changing the main battery.
Removing the battery from the computer
To remove the battery:
1 Save your work.
2 Power off the computer or place it in Hibernation mode
according to the instructions in “Using and configuring
Hibernation mode” on page 68.
3 Unplug and remove any cables connected to the
computer, including the AC adapter.
4 Close the display panel and turn the computer upside
down.
5 Slide the battery release lock to the unlocked position.
Sample unlocking the battery release lock
To Next Page
Loading...
