Replacement Procedures
4
4.9 Display assembly
Removing the display assembly
The following describes the procedure for removing the display assembly (See Figure 4-13 to
4-17).
1. Close the display and turn the computer upside down.
2. Open the MINIPCI Door and remove the wireless LAN screws and antenna connector.
M2.0x3.0 FLAT BIND
(Locktight)
Figure 4-13 Removing the screws (securing display assembly)
4-28
Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08)
To Next Page
Loading...
