Test Program for Field.
62 Satellite U400 and Satellite Pro U400 Tests and Diagnostics Manual
9. Project Identifier [1]LCD13”[2]LCD14”[3]LCD15”[4]LCD17”
a. SLP2.0 Build Sig [1]Non OS [2]OS
b. Wireless LAN ID (001E4CXXXXXX)
Select 1 ~ b to keyin new data , select 0 to exit program , program will compare input data
length with the max length , if over will retry keyin
Note : Please Check New DMI Information After System Restart !! V2.6
1. **** Manufacture Name ( TOSHIBA ) - (15)
2. **** Product Name ( Satellite XXXXXX ) - (31)
3. **** Part Number ( PSL20X-XXXXXX ) - (15)
4. **** Serial Number ( 12345678W ) - (9)
5. **** OEM String ( PSL20X-XXXXX,SXXXXXXXXXX ) - (31)
6. **** Model Select [1]Dyn-Jpn [2]Tos-Jpn [3]Tos-Eng [4]Tos-FR – (2)
7. **** Write UUID ( XXXXXXXXXXXXXXXX ) – (16)
8. **** Brightness Write ( XXXXXXXX ) – (8)
9. **** Project Identifier [1]LCD13”[2]LCD14”[3]LCD15”[4]LCD17”-(1)
a. **** SLP2.0 Build Sig [1]Non OS [2]OS-(2)
b. **** Wireless LAN ID ( 001E4CXXXXXX ) –(6)
0. **** Exit
Please Select (1 ~ b) To Modify DMI String :
Current Data of EEPROM : Toshiba
1. Enter the Manufacture Name : TOSHIBA
Your Keyin is : TOSHIBA …… This is your keyin data
EEPROM return : TOSHIBA ……. This is read from eeprom back
Press any key to continue
Note : Please Check New DMI Information After System Restart !!
If Keyin length too long will retry :
Current Data of EEPROM : 12345678W
4. Enter the Serial Number : 12345678901234
Your Keyin String Length Not Correct 14 > 9 !!!
Current Data of EEPROM : 12345678W
4. Enter the Serial Number :
NOTE: The SLP2.0 is Microsoft SPEC , call “System Locked Pre-Installation”or”SLP”,
It is for OEM pre install Windows and no need to Active , If you select Non OS , then you
need to Active your OS before you use .
To Next Page
Loading...
