Replacement Procedures
Satellite U400/Satellite Pro U400/PORTEGE M800
Maintenance Manual 4-12
4.4 HDD
Removing HDD
The following describes the procedure of removing a HDD.
CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause
data loss or damage to the device.
1. Turn the computer upside down.
2. Remove the following screws securing the HDD assembly.
• M2.0×3.0B FLAT BIND screw x2
3. Disconnect the HDD assembly from the connector on the system board.
To Next Page
Loading...
