4 Replacement Procedures
4.9 Keyboard
Removing the Keyboard
To remove the keyboard, follow the steps below and refer to Figures 4-14 to 4-17.
1. Remove the following screws securing the bottom of the keyboard around on the
bottom case.
• M2×2.5L FLAT HEAD screw ×2
2. Turn the computer over and open the display and remove the keyboard cover.
Figure 4-14 Removing the screws securing keyboard cover
Figure 4-15 Removing the keyboard cover
3. Remove the following screws securing the keyboard plate on the Top case.
Satellite/Satellite Pro U500/U500D, PORTEGE M900/M900D Maintenance Manual 4-31
To Next Page
Loading...
