4 Replacement Procedures
4.24 LCD Module
Removing the LCD Module
To remove the LCD Module, follow the steps below and refer to Figure 4-43 to 4-44.
1. Remove three pieces of tape securing the Wireless LAN Cable and Coaxial Cable and
pull the cables out of the cable guide.
2. Remove the following screws securing the LCD Module.
• M2.5×5L FLAT HEAD screw ×6
Tape
Figure 4-43 Removing the Screws and tape
4-70 Satellite/Satellite Pro U500/U500D, PORTEGE M900/M900D Maintenance Manual
To Next Page
Loading...
