Toshiba Satellite U940 - LED Board; Removing the LED Board; Installing the LED Board

4 Replacement Procedures Error! No text of specified style in document. Error! No text of
specified style in document.
4-24 Metis 10F/10FG Maintenance Manual [CONFIDENTIAL]
4.8 LED Board
Removing the LED Board
Remove the LED board according to the following procedures and Figure 4-12.
1. Press the hook on the LED board and pull it, let the LED board slide out up structure.
Figure 4-12 Removing the LED board
2. Gently remove the LED board from the touchpad board.
Installing the LED Board
Install the LED board according to the following procedure.
 Press down the LED board, push it and let the LED board slide in the logic upper structure,
make sure the hook is securely in place.