Error! No text of specified style in document. Error! No text of specified style in document. 4
Replacement Procedures
[CONFIDENTIAL] Metis 10F/10FG Maintenance Manual 4-25
4.9 Touchpad
Remove the Touchpad
Remove the touchpad according to the following procedures and Figure 4-13.
1. Remove the two M2.5×4 screws securing the touchpad and release the three hooks (mark
a shown in figure 4-12).
2. Loosen three hooks that lock the touchpad module.
3. Remove the touchpad module at angle of 20 degree.
To Next Page
Loading...
