Error! No text of specified style in document. Error! No text of specified style in document. 4
Replacement Procedures
[CONFIDENTIAL] Metis 10F/10FG Maintenance Manual 4-35
4.13 Speakers
Removing the Speakers
Remove the Speakers according to the following procedure and Figure 4-18.
Gently remove the left and right speakers from the logic lower assembly.
Figure 4-18 Removing the speakers
Installing the Speakers
Install the speakers according to the following procedure:
1. Seat the left and right speakers in the logic lower upper assembly.
2. Route the speaker cable in the routing channel on the logic lower assembly and secure it
in place.
To Next Page
Loading...
