3 Tests and Diagnostics
1. Write Product (32)
2. Write Serial (64)
3. Write Version (32)
4. Write OME string (64)
5. Back to test title
After write OK, you should reboot the system that can make the setting effective, or you can
write next data before reboot system, the figure below will displayed:
NOTE: Should input correct DMI data, and should reboot the system that can make the
setting effective.
If you select “5”, program will go back to the Main Menu as below:
SatelliteA660/ProA660 Series Maintenance Manual
33
To Next Page
Loading...
