20
English
DVD Menu Options
conrm.
Select { 8 Adult } to disable parental level and
allow all discs to play.
DVDs that are rated higher than the level you se-
lected will not play unless you enter your four-digit
password.
Tips:
-This feature will not limit viewing if the disc manu
-
facturer did not code the disc.
-VCD, SVCD, CD have no level indication, so paren
-
tal control has no effect on these type of discs. This
also applies to most illegal DVDs.
-Some DVDs are not coded with a rating though the
movie rating may be printed on the disc cover. The
rating level feature does not prohibit play of such
discs.
Changing the Password
You need to enter your four-digit password to play a
prohibited disc or if prompted for a password.
A In "Rating", press / to select {Set Password
}, then press OK.
You will be prompted to enter your four-digit pass-
word.
B Use the number buttons ( 0-9 ) to enter the four-digit
password.
When doing this for the rst time, enter the default
password '0000 '.
If you forget your old four-digit password, enter the
default password ' 0000'.
C Press OK again to enter the new four-digit password.
The new four-digit password will now take effect.
D Press OK to conrm.
Using the Misc (Miscellaneous) setup
menu
A Press SETUP on the remote control.
The system setup menu appears.
Use Default Settings
Language
Video
Audio
Misc
Rating
B Press / to select { Misc }, then press .
C Press OK to select “ Use Default Settings ”.
The menu will appear.
Use Default Settings
NoYes
{ Yes }
Select this will reset all options and your personal
settings to the factory defaults, except your password
and rating level.
{
No }
Select this to close the menu.
D
Use
/
to select a setting and press OK to
conrm.
E To exit, press SETUP.
Helpful hint: Press to go back to previous menu item.
Press SETUP to exit the menu item.
Tray Lock
Press SETUP button, then press the number button
"2006" in sequence to lock the tray.
All functionality of the player and playback remain
the same except for the OPEN/CLOSE button.
After the tray is locked, "Tray Lock Is On" will
appear on the screen when OPEN/CLOSE is
pressed.
To unlock the tray, just follow the same procedure
as above.