Toshiba SD-170EKB2 - Page 5

1-2
The power can not be on or off
Go
Ye s
Yes
No
No
The power can’t be
on or off
Yes
Repair the power board
Check the power supply
on the power board is
normal.
Check/Correct connection
Whether the connection
to S1 is broken.
Correct the connection
Replace U1.
No
No
Yes
Yes
Check if the CN3 on
the front board to CN5
on the decoder board
is in good contact.
Whether there is 0V and
3.3V voltage difference on
Pin 94 PCON of U1.
Trouble shooting chart