Toshiba SD-2200 - Connecting the DVD Player; Connecting to a Television

uonnecirons
nnecting to a TV
Connect the DVD video player to your TV.
For details of output sound, see [33) .
Connecting to a TV
[ Signal flow
connect the yellow video cable. TV or monitor with
audio/video inputs
• Make the following setting.
Setting Select: Page
“Audio Out Select” “Analog 2ch”
[P>
m
Notes
• Refer to the owner's manual of the connected TV as well.
• When you connect the DVD video player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
• If your television set has one audio input, connect the DVD video player to a Y cable adapter (not supplied) and then connect
to your TV.
• Connect the DVD video player directly to your TV. If you connect the DVD video player to a VCR, TV/VCR combination or
video selector, the playback picture may be distorted as DVD video discs are copy protected.
16