52
Quick control
Accessing Features - NAVI - (continued)
You can sample a scene
from a playback picture
and transform it into a
background picture.
After selecting this icon and pressing ENTER, the
following on-screen display appears:
e.g.
1 Pause playback at a scene you want to capture.
2 Adjust the picture quality if necessary as follows.
1) Move the cursor control (
/ ) to select a
desired item, and press ENTER.
2) Move the cursor control (
/ ) to adjust the
value, and press ENTER.
(-7) Lower Contrast Higher (+7)
(-7) Darker Brightness Brighter (+7)
(-7) Duller Color Brighter (+7)
(-7) Gamma*
1
(+7)
(-7)
Reducing red Red Enhancing red
(+7)
(-7)
Reducing green Green Enhancing green
(+7)
(-7)
Reducing blue Blue Enhancing blue
(+7)
*1: Adjust when a picture is too dark or too
whitish.
Note
You cannot move the picture to sample another scene
after you have started the adjustment. To change the
scene, select “Revert” then press ENTER, and return to
step 1.
NAVI menu items
Capture
Blue
Capture
Revert
Exit
Storing
Contrast
Brightness
Color
Gamma
Red
Green
You can view a picture
with less video noise.
After selecting this icon and pressing ENTER, the
following on-screen display appears:
e.g.
1 Move the cursor control to select.
DNR2: To increase the DNR1 effect.
DNR1: To reduce minute video noise.
DNR Off: Off.
Edge Enhance : To sharpen picture edges.
2 Press ENTER.
Notes
• Actual picture enhancement may vary depending on the
quality of the disc.
• While the DNR2 level can provide additional
improvement in the reduction of noise in the video
signal, it may produce undesireble picture artifacts on
some discs. Should this occur, select a more appropriate
DNR level (DNR1 or off).
• Depending on the disc, some kinds of picture details
may be lost by the picture enhancement.
DNR
ENTER
ENTER
DNR2
DNR
DNR1
DNR Off
Edge Enhance
To Next Page
Loading...
