Operation with tape (Continued)
OPERATION
Timer recording using On Screen Display
You may set up to seven timer record events within one month
of the current date.
Note
Before setting the timer make sure that you have set the
DVD+VCR clock correctly and you know which stations you
have tuned TV stations on your DVD+VCR.
11
Insert a video cassette with protection tab into your DVD+VCR.
The video cassette should have the window side facing up and
the arrow facing away from you.
22
Press VCR MENU.
Press
1 or 2 to select REC.
Press
ENTER/OK.
33
Press ENTER/OK to start setting the timer record event.
If all timer record events are full press
v
or
V
to select the event
that you wish to remove and replace.
Press
b
to delete the event.
44
Press the numbered buttons to enter the station that you wish
to record.
When selecting stations 1 - 9, press 0 first, then the channel num-
ber; for example Stations 3 - 03. You may also select Channels
by pressing
v
or
V
. Once selected press
B
.
If you wish to record from AUDIO IN (L/R) and VIDEO IN on the
front or from the EURO SCART sockets on the back of your unit,
press INPUT SELECT to select for correct display (AV1, AV2 or
AV3).
55
Press the numbered buttons to enter the date of the pro-
gramme. If you press
ENTER/OK before entering the date you
may select one of the following automated recording features.
Press
1 or 2 to select, then press ENTER/OK to confirm.
DLY To record every day (except Saturday and Sunday) at the
same time.
SU~SA To record at the same time every week.
66
Press the numbered buttons to enter the recording start and
end times of the programme that you wish to record.
Please note your DVD+VCR uses a 24 hour clock. e.g. 1pm will
be displayed as 13:00.
You may also select the start and end times by using
v
or
V
.
77
Press
B
and press
v
or
V
to switch VPS/PDC on or off.
Press
B
to select the recording speed.
Press
v
or
V
to select the desired tape speed (SP, IP, or LP).
IP mode determines how much tape is left and switches speed
from SP to LP, if necessary, to complete recording the program.
IP mode is not selected when VPS/PDC is ON.
88
Press VCR MENU to set another timer record event and follow
steps 3 to 7.
Check that the timer event details are correct.
Press
VCR MENU twice.
If PLEASE CHECK is displayed, you have entered incorrectly
and will need to re-enter the data.
Press
++
++
//
//
11
11
to switch your DVD+VCR Standby.
TIMER will appear in the display window while your DVD+VCR
waits to make the recording.
99
Within 5 seconds, press
++
++
//
//
11
11
twice to end recording.
Notes
z If at a later date you wish to delete or change any of the settings in
timer event memory you may do so without having to enter all the
timer event information again. Simply display the timer event screen.
Use
v
or
V
to select the event that you wish to delete or change.
Press
b
to delete the event...or Press ENTER/OK to change; then
press
b
or
B
to select; Station, Date, Start and End times and LP.
Press
v
or
V
to enter the correct information.
z If Timer record events Overlap...
Make sure that the preset times of the timer recording events do not
overlap. If they do, the earlier programme will always be given
priority.
Example:
Programme 1 is programmed to start at 16:00 and end at 17:00.
Programme 2 is programmed to start at 16:30 and end at 17:30.
(In this case, Programme 1 will be recorded in its entirety, but only
the last 30 minutes of Programme 2 will be recorded.)
z To watch a DVD while performing a timer recording, press TV/VCR
to select VCR mode.
z Video Programme System (VPS)
The Video Programme System (VPS) ensures that the TV pro-
grammes that you have programmed for timer recording will be
recorded exactly from their beginning to end, even if the actual
broadcasting time differs from the scheduled time due to delayed
start, or if the programme is extended beyond its scheduled time.
Also, if a programme is interrupted, for example, if a news flash
is inserted, the recording will also be interrupted automatically
and resumed when the programme continues.
The VPS signal is broadcast by the TV station and this controls
the timer in the video recorder.
VPS should be set ON for all timer recordings from TV stations
broadcasting these signals. It should be set OFF for all timer
recordings from TV stations that are not broadcasting these sig-
nals.
*** The similar system PDC, which is used in the time being in the
Netherlands, can also be used with your new video recorder.
To Next Page
Loading...
