Connections
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD video player
to optional audio equipment.
For connection to your TV, see "Connecting to a TV" [_[_. _j : Front speaker r_ : Center speaker
For details of output sound, see [_. [] : Rear speaker =_ : Signal flow
: Sub woofer
I Connecting to an amplifier equipped with a Dolby Digital decoder
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies,
and is now available to reproduce this realistic effect in the home You can enfoy motion
picture and live concert DVD video discs with this dynamic realistic sound by connecting the
DVD video player to a 6 channel amplifier equipped with a Dolby Digita_ decoder or Dolby
Digital processor. If you have a Dolby Pro Logic Surround decoder, you will obtain the full
benefit of Pro Logic from Ihe same DVD movies lhat provide full 5 1-channel Dolby Digital
soundtracks, as well as from titles with the Dolby Surround mark.
Amplifier equipped with a _ O _ ® _e
Dolby Digital decoder _ _ -- --
ToOPTICAL._.ToCOA_LL _"=!=,__
type digital type digital , . : :
audio input audio input Connect either. _
75 t_ coaxial cable
/
Optical digit a_cable |
l Manufactured under license from Dolby
Laboratories "Dolby", "Pro Logic" and
the double-D symbol are trademarks of
Dolby Laboratories. Confidential
Unpublished Works. @1992-1997 Dolby
Laboratories, Inc. All rights reserved
• Use DVD video discs encoded via
the Dolby Digital recording
system,
• Make the following setting.
Setting Select: Page
"Audio Out Select" "Bitstream" _)
Recording system Nr] [_
I Connecting to an amplifier equipped with 5.1ch audio inputs
5.1ch surround sound
The Dolby Digital decoder equipped with this DVD video player enables you to obtain the full ° Use DVD video discs encoded via
benefit of 5.1 channel Dolby Digital sound tracks when you connect the DVD video player to
a Dolby Digital ready amplifier equipped with 5.1 channel audio inputs.
Amplifier equ pped w h = . '¢
5 ch audo nputs 'e _" "
TO5 1CH SURROUND
AUDIO OUT
Audio cable
the Dolby Digital recording
system.
• Make the following setting.
Setting Select: Page
r_
"Audio Out Select" "Analog 6ch" r_
Recording system I-][-I
2 channel sound is output in the Dolby Pro
Logic format TOobtain the obginal 2
channel sound, select "Analog 2ch."
I Connecting to an amplifier equipped with Dolby Pro Logic Surround
Dolby Pro Logic Surround
You can enjoy the dynamic realistic sound of Dolby Pro Logic Surround by connecting an amplifier and speaker system (right and left
front speakers, a center speaker, and one or two rear speakers)
• With an amptifier equipped with Dolby Digital
Connect the equipment the same way as described in "Connecting to an amplifier
equipped with a Dolby Digital decoder." Refer to that amplifier's owner's manual and set
the amplifier so you can enjoy Dolby Pro Logic Surround sound
• With an amplifier not equipped with Dolby Digital
Connect the equipment as follows.
Make the following setting.
Set,iogtSe,echPog
"Audio Out Select" "Anal_g2ch"
Amplifie r equipped wit h I
Dolby Pro Logic Surround "-_ _'- _ _ ,, ,
_ Be sure to set Audio Out Select '
" II'- .._ . / oo ooo o to "Analog 2ch" when you enjoy
,oauo,onou ,
[1 sounds of Dolby Pro Logic
AI T O2CH AUDIO OUT U Surround using this connection.
| Audio cable _-_ i * Connect one or two rear speakers
The output sound from the rear speakers will be
monaural even if you connect two rear speakers
118
To Next Page
Loading...
