Functionsetup
C stomizing the Function Settings
You can change the default settings to customize performance to your preference
1,6
2, 3, 4
:3, 4
RETURN
I_ Setting procedure
Press SETUP during stop,
SETUP The following on-screen display
appears.
Press <1/ • to select a symbol for the
setting you want to change•
(See the nextpage.)
Settings on languages
Settings on playback picture
conditions
Settings on sound output
Settings on displays
Settings on operational options
Press • / • to select the setting you
want to change, then press ENTER.
___ ENTER
Ld
Change the selection by • / • or other
buttons, referring to the pages from 37,
then press ENTER.
ENTER
-.®
Repeat steps 3 and 4 to change other
settings.
To select another symbol, go back to step 2.
Press SETUP.
SETUP The on-screen display disappears.
• To return to the previous display
PressRETURN,
RETURN
©
Notes
• The on-screen display disappears when you press the
SETUP button
The SETUP button can function even during normal
playback, however some operations may be inaccessible,
and a message will appear _n this case. try again after
playback is stopped.
n
o_-.
3si
To Next Page
Loading...
