Toshiba SD-P1600 - Customizing the Function Settings; Setting Procedure

46
Function setup
Press SETUP during stop.
The following on-screen display
appears.
Press / to select the setting you
want to change, then press ENTER.
(See the next page.)
Press / to select the setting you
want to change, then press ENTER.
AUDIO MENU
D.R.C. On
Digital Out Analog 2ch
Bitstream
Analog 2ch
PCM
E.A.M. Normal Normal
AUDIO MENU
D.R.C. On 3D
Digital Out Analog 2ch
E.A.M. Normal Normal
Change the selection by / , by
referring to the corresponding pages
47
, then press ENTER.
Press ENTER, then repeat steps 2 and 4
to change other settings.
Press SETUP.
The on-screen display disappears.
DVD-V
VCD CD
Setting procedure
Customizing the Function
Settings
You can change the default settings to
customize performance to your preference.
2
3
1
5
6
/ / /
ENTER
1, 6
16:9 Widescreen
e.g.
e.g.
4
AUDIO MENU
D.R.C. On
Digital Out Analog 2ch
Bitstream
Analog 2ch
PCM
E.A.M. Normal Normal
e.g.
ENTER
1, 6
/ / /
SD-P1600_E_P45-52 05.1.14, 10:42 AM46