56
Connections
Viewing Pictures From Connected Video Equipment
You can use the LCD of this player to monitor pictures of video equipment connected via the AV IN jack.
To select the external AV input mode, press the MODE button. In the external AV input mode (AV-IN appears on the
screen), screen saver function/auto power OFF function becomes ineffective.
Notes
• When supplying non-standard signals such as playback images from a video deck or images from a game player, some
images may be displayed incorrectly.
For example, shooting games, which shoots at a target on the screen with a light gun, may not work because of the LCD
Color monitor properties.
Signal flow
To AV I N
Audio/video cable
(supplied)
To video output (yellow)
To audio output (red)
Video equipment
To audio output (white)
To switch LCD screen / Memory Card / AV-IN
Select a mode other than AV-IN to output to an external
device connected to the player.
Press MODE button on the player.
Each time the button is pressed, the
LCD will change as below.
Normal: Outputs video and audio to the LCD
of the player only.
Memory Card: To switch to the Memory Card mode.
AV-IN: Inputs video and audio from an
external device such as a VCR
connected to the LCD of the player,
thus allowing you to view video on
the LCD of the player.
Note
Normal will be set the next time the player is turned on even if
you turn the power of the player off while AV-IN is set.
Normal
Memory Card
AV-IN
To Next Page
Loading...
