Toshiba SD-V394 - Manual clock setting

26
Basic setup (VCR)
CANCEL
Press VCR MENU.
EXAMPLE: Setting the clock to “8:30 AM” March, 25
(SAT), 2006.
1
8 : 30AM SAT
Manual clock setting
After setting the clock, date and time starts
functioning automatically.
6
Note:
After a power failure or disconnection of the power, the timer
settings will be lost. In this case, reset the present time.
To make corrections any time during the process
Press CANCEL repeatedly until the item you want to
change blinks, then press SET + or –.
Press SET + or – to select “SYSTEM SETUP”,
then press ENTER.
2
Press SET + or – to select “CLOCK SET”,
then press ENTER.
3
Press SET + or – to set the month, then press
ENTER.
4
Set the day, year and time as in step 4.
5
〈    〉
 
 

  
 
 
  
 
 





  

 
 

 
Clock setting (Continued)
If the AUTO CLOCK process did not set the date and time correctly,
you must set them manually for timer recording and DAYLIGHT
SAVING TIME.
VCR MENU
〈+/ – /ENTER/CANCEL/MENU 〉
MONTH
DAY
YEAR
TIME
3
1 (WED)
2006
12 : 00
AM
〈+/ – /ENTER/CANCEL/MENU 〉
MONTH
DAY
YEAR
TIME
3
25 (SAT)
2006
8 : 30
AM
ENTER
SET +/–
2I30101B-En_p26-31 1/12/06, 17:0526