Toshiba Strata CTX - Page 416

System Error Codes
Station Programming Error Codes
B-6 Strata CTX Programming - Part 4: Appendices 04/03
205
51
)%
The Primary DN entered conflicts with a value of an existing
numbering scheme.
51
110 The Primary DN entered conflicts with a value of an existing
numbering scheme.
51
)%
120
130
When assigning an Owner DN to a CO or GCO, the related
CO or GCO buttons are not assigned to the respective FB(s)
of the owner’s extension.
52
The Primary DN entered conflicts with a value of an existing
numbering scheme.
52
)%
110 The Secondary/PhDN entered is already used in ISDN
extenstion(s), etc.
52 )%
120
130
The CO or GCO Owner DN entered does not exist.
80
)% The PrimeDN does not exist in the system.
82
 The sub-parameter values assigned to the FB are invalid.
82 120 The line number entered does not exist.
96 
110
130
140
The maximum allowable value for GCO, POOL, or PhDN has
been exceeded.
98
)%
)%
The quantity of Flexible keys programmed exceeds the
system’s capacity.
206
49
)%
)%
An invalid DN was selected. The entered PDN is not related to
this Phantom DN.
51 -
Phantom DN entered is invalid (the entered value is used as a
part of an existing extension number or numbering plan).
51
)%
)%
)%
An invalid DN was selected (the entered value is used as a
part of an existing extension number or numbering plan).
52 -
The Phantom DN entered conflicts with an existing DKT
extension.
52
)%
)%
The entered DN conflicts with an existing DKT extension, or
numbering plan, etc.
80 )%
A Phantom DN that does not exist in the system has been
selected.
208
51
)%
An invalid DN was selected (the entered value is used as a
part of an existing extension number or numbering plan).
52 )% The entered DN conflicts with an existing numbering plan.
80
)%
The DN entered is an extension number that does not exist in
the system.
Program Code FB
Sub-
parameter
Error Descriptions