System Error Codes
Station Programming Error Codes
Strata CTX Programming - Part 4: Appendices 04/03 B-7
System Error Codes
209
49
)%
If Hunt Method field is set to Distribute, the incoming
destination Pilot Number must be assigned.
50
)%
If Hunt Method is set to Distribute, Pilot Number must be
assigned.
51
)%
The entered value conflicts with an existing number or
numbering plan.
52
)%
The entered value conflicts with an existing DKT extension.
80
)%
The designated Hunt Group number does not exist in the
system.
96
)%
The assigned Hunt Group number, exceeds the system
capacity.
210
51
)%
The entered DN does not exist in the system (The entered
value is used in an extension number or numbering plan).
52
)%
The entered value is used in the numbering plan.
80
)%
The entered Prime DN does not exist in the system.
96 -
The Pickup group number entered is out of the range for the
system’s capacity.
213
33
)%
100
110
120
130
140
The sub-parameters for Feature Code (Key Number) must be
assigned.
33 - 120
The line number entered is out of range for the system’s
capacity.
48
Essential sub-parameter values must be entered.
49
)%
110
Two or more PhDNs with the same value are registered to one
extension.
49
)%
700
790
800
810
820
830
The feature code(s) allowed to attendant console only is
registered.
49
)%
610
Two or more DSSs with the same value are registered to one
extension.
49
)%
120
130
560
610
The entered DN does not exist in the system.
51 -
The Prime DN entered conflicts with a value of an existing
numbering scheme.
51
)%
110
The secondary/PhDN entered cannot be registered. The
number conflicts with an existing number scheme.
Program Code FB
Sub-
parameter
Error Descriptions
To Next Page
Loading...
