Toshiba Strata CTX - Page 420

System Error Codes
Station Programming Error Codes
B-10 Strata CTX Programming - Part 4: Appendices 04/03
216
51
)%
The entered DN does not exist in the system (the entered
value conflicts with an existing extension number or
numbering plan).
52
)%
The entered DN conflicts with an existing ISDN extension(s),
etc.
80
)% The designated Prime DN does not exist in the system.
217
51
)%
The entered DN does not exist in the system (the entered
value conflicts with an existing extension number or
numbering plan).
52
)%
The entered DN is not designated as an ISDN extension in
Program 202.
80
)% The designated DN does not exist in the system.
218
49
)%
The DN entered is already assigned to another Hunt Group. A
DN can only be in one Hunt Group.
51
)%
The entered DN does not exist in the system (the entered
value conflicts with an existing extension number or
numbering plan).
52
)% The entered DN conflicts with an existing numbering plan.
80
)% The entered Hunt Group number does not exist in the system.
80 )% The entered DN does not exist in the system.
82
)%
The number of Hunt Group assignments has exceeded the
system capacity.
96 )%
The allowable number of Hunt Group member assignments
has been exceeded.
98
)%
More than 560 DNs are designated for members of one
hunting group.
Note For FBs in Program 205, 213 and 215, codes shows the entered Feature Code.
Program Code FB
Sub-
parameter
Error Descriptions