Toshiba Strata CTX - Page 422

System Error Codes
Trunk Programming Error Codes
B-12 Strata CTX Programming - Part 4: Appendices 04/03
302 96
)%
The number of allowable Channel Groups has been exceeded
when a new ISDN trunk assignment is made.
303
52
)%
The entered Channel Group number conflicts with an existing
ISDN extension(s).
80
)%
The entered Channel Group number does not exist.
304
49
)%
)%
The Group Type and Trunk Type are assigned based on the
ILG settings found in ILG field of Program 300 and in ILG field
of Program 302.
49
)%
The entered Pool Key Number cannot be assigned. It belongs
to another ILG number.
49
)%
The entered GCO Key Number cannot be assigned. It
belongs to another ILG number.
80
)%
The entered ILG does not exist in the system.
96
)%
)%
The allowable number of GCO or POOL Key Number has
been exceeded.
96 )% The number of ILGs exceed the system capacity.
305
49
)%
The entered ILG number cannot be deleted. Trunk
relationships assigned in Programs 300 and 302 must deleted
first.
80
)% The entered ILG does not exist in the system.
306
49
)%
)%
The Group Type and Trunk Type are assigned based on the
OLG settings found in ILG field of Program 300 and in ILG
field of Program 302.
49
)%
)%
The entered Pool Key Number cannot be assigned. It belongs
to another OLG number.
49 )%
The entered GCO Key Number cannot be assigned. It
belongs to another ILG number.
80
)%
The entered OLG does not exist in the system.
96
)%
The allowable number of OLG Group Number has been
exceeded.
96
)%
)%
)%
The allowable number of GCO or POOL Key Number has
been exceeded.
307
49
)%
The entered OLG number cannot be deleted. Trunk
relationships assigned in Programs 300 and 302 must be
deleted first.
80
)% The entered OLG does not exist in the system.
308
33 )% The entered equipment value is invalid.
80
)%
The designated trunk equipment does not exist in the system.
Program Code
Occurred
FB
Sub-
parameter
Error Descriptions