REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-31-
PROGRAM 29
DSS CONSOLE BUTTON ASSIGNMENTS
ACTIONSTEP DISPLAY/PRINTOUT
1 >MODE PROG
P
Enter Program Mode
At the >MODE prompt, enter P R O G CR.
2 P 29
P29
Enter Program Number
3 P29Enter Console Number and Buttonstrip Group Number
5
P29 Enter the 2-digit Button Number to be Programmed (01 ~ 20):
(current feature code displays after button entry).
7
8
Press SPACE to go to next button.6
Enter New (2- or 3-digit) Feature Code
Press or
Press 2 9 CR.
Press
Button Group Number (1 ~ 3)
Console Number (1 ~ 2)
4
Key code
3-digit code
2-digit code
Console
Button group
Button
No.
New
code
Old
code
P29
P29
Press CR to store data.
or
Continue with Step 3 until all data is entered.
To Exit this Program
Press # # CR.
Program 29
NOTE:
Pro
rams 30 and 31
use T
pe 1 procedure.
To Next Page
Loading...
