Setting System Parameters
System Messages, Names and Memos
18 Strata DK System Administrator Guide 5/00
System Messages, Names and Memos
You can write or edit station LCD messages, names or numbers.
➤ To write LCD messages, names, or numbers
1. Access message/
memo/name displays.
When you select a message number, a cursor
(–) appears at the first character in the message.
2. Enter up to 32
alphanumeric
characters, (see Table
3 and the figure at the
right) using the
station keypad.
3. Blank out any portion
of a message by
pressing
and
moving the cursor to
the right, when in the
alpha character mode.
Each character the cursor transverses is deleted.
2358
Toggles between
alphanumeric
characters
Scrolls alpha/
special characters
Move Left
Move Right
(Alpha mode only)
To Next Page
Loading...
