Toshiba Strata DK - System Speed Dial Numbers; Clearing a Speed Dial Entry

Setting System Parameters
System Speed Dial Numbers
Strata DK System Administrator Guide 5/00 23
System Speed Dial Numbers
System Speed Dial telephone numbers can be stored in the system memory by the
Administrator station only.
➤ To store a feature or System Speed number in a System Speed Dial Code
Clearing a Speed Dial Entry
➤ Repeat the preceding procedure, skipping Step 4.
1. Press 5HGLDO, with
the headset on-hook.
2. Press
6' button
...or
6SHHG'LDO +
System Speed Dial
Code.
See Table 8 on Page 42.
3. Input the telephone
number to be stored
(up to 20 digits).
...or enter the feature
code sequence.
See Table 4 on Page 26.
4. Press
5HGLDO. The information is stored in memory.
5. Repeat Steps 1~5 for
each telephone
number to be stored.