Toshiba Strata DK - Page 40

Setting System Parameters
Speed Dial—Advanced Features
30 Strata DK System Administrator Guide 5/00
Linked Speed Dial Example
Note Your system must be programmed for “Toll Restriction Override by System
Speed Dial” to allow this example.
➤ To store a CO line access code plus a long distance carrier access code (10288) and
link to *690
In the following example, you are going to link

690 to a telephone number and store
it in System Speed Dial location

.
1. Press
5HGLDO +
6SHHG'LDO + 
+ [PDN] +

+
5HGLDO
The CO line access code and the long distance carrier
code (910288) in the System Speed Dial location

690 is stored.
Note “I” displays when the [PDN] is stored.
♦ [PDN] is used to automatically access internal dial
tone before dialing
.
♦  =  is the CO line access code and
 is the long distance carrier access code.
2. Store the System
Speed Dial
information on Speed
Dial Code


from
the Administrator
station.
3. Press
5HGLDO +
6SHHG'LDO +


+
6SHHG'LDO +

+
5HGLDO.
♦  is the System Speed Dial Code.
♦  is the System Speed Dial Code that is being
linked to code
.
♦  is the telephone number with
area code.