System & Station
Program 30 Station Class of Service
3-60
Strata DK40 Programming Manual Spring 1999
Program 30 Overview
Program 30 enables or disables features for individual telephones at the station level. The
following text describes Program 30 LEDs.
LED 20: Dialled No & Sub Address Seperated by # from
standard telephones
This enables standard two wire devices to dial “Sub Addresses”. The actual “dialled number”
and Sub Address can be seperated by dialling “#”. If the LED is set to “ON” for the port
representing the standard two wire device will acknowledge the “#” as seperating the Dialled
Number and Sub Address information. If disabled (LED “OFF”) when “#” is dialled, the
system will take no action.
Feature
LED
Port
0
1
5
0
1
6
0
1
7
0
1
8
0
1
9
0
2
0
0
2
1
0
2
2
0
2
3
0
2
4
0
2
5
0
2
6
0
2
7
0
4
9
Dialled No. & Sub Address
seperated by # from a 2 wire
extension (LED ON)
20
Privacy Override
19
Executive Override
18
DND Override
17
Change TR Travelling Class Code
16
Change Verified Account Code
15
Verified Account Codes
14
13
12
Dial Pulse - DTMF OFF - TIE LINES
11
Change DISA Security Code
10
Change TR Override Code
09
Forced Account Code
08
OCA/Busy Override Automatic
(originating OCA)
07
ABR Access
06
Speed Dial Allowed
05
04
Microphone Button on at Start of
Call
03
MIC Button Locked
02
Speakerphone
01
To Next Page
Loading...
