Toshiba Strata DK40 - Program 34 Hold Recall Timing; Program 34 Overview

Program 34 Hold Recall Timing System & Station
Strata DK40 Programming Manual Spring 1999
3-75
Program 34
Hold Recall Timing
Program Type:
Station
Initialised Default:
Assigns a Hold Recall Time of 032 seconds to all ports
Program 34 Overview
Each station can have a different time (from 011 to 160 seconds) from the point of placing a
call on hold to the point of recall. Initialised data assigns a recall time of 032 seconds to all
ports.
(QWHU 3URJ 0RGH 0 6SNU 67 +ROG 0 6SNU & +R OG 0 6SNU & & +R OG 0 6SNU & & +ROG
Processor Port Range
DK40 000~027
Port Seconds Port Seconds
000 014
001 015
002 016
003 017
004 018
005 019
006 020
007 021
008 022
009 023
010 024
011 025
012 026
013 027
SELECT = Station Logical Port Number
Enter the port number having its Hold Recall Time
defined. To add a port range, enter XXX
*
XXX
(low port
*
high port).
HUNT TIME = Seconds
Enter the number of seconds the system will
wait (three digits).
Enter 000 for no Hold Recall. Enter 011~160
for 11 to 160 seconds.