Program 39 Flexible Button Assignments
System & Station
Strata DK40 Programming Manual Spring 1999
3-89
Door Lock 1 Thru 4
(DDCB)
DRLK 1
DRLK 2
DRLK 3
DRLK 4
472
473
474
475
Momentarily unlocks door (3-6 seconds) see Prog 77-1
and 77-2
Intercom INT/PDN 000 Intercom access key
LCD Message MSG 481 Begins LCD message selection
Lock LOCK 461 Begins Lock/Unlock procedure
Message Waiting and
Recall
MW/RC 499
Provides message waiting indication for EKT/DKT and
recall key
Microphone Cut Off MCO 488
Sets Microphone on/off for incoming handsfree intercom
calls
Night Transfer Tenant 1 NT1 439 Sets Tenant 1 Exchange lines to Day/Night ringing mode
Night Transfer Tenant 2 NT2 440 Sets Tenant 2 Exchange lines to Day/Night ringing mode
Night Transfer Tenant 3 NT3 441 Sets Tenant 3 Exchange lines to Day/Night ringing mode
Night Transfer Tenant 4 NT4 442 Sets Tenant 4 Exchange lines to Day/Night ringing mode
Pause PAU 495 Sets pause to speed dial. See Prog 12-3
Pause (Long) PAU/L 493 Sets a 10 second pause in speed dial
Pooled Line PL
301-
308
Multiple Exchange Lines may appear under one key
Privacy PRIVACY 453 Prevents privacy override (Not Exclusive Override)
Privacy Release PRV RLS 479
Changes Station Privacy mode to non-private for
Exchange Lines
Redial Last number
#
RDL 496 Redials the last number
Release RLS 476 Releases current call and makes station idle
Save Last Number SAVE 485 Saves Last Number Dialled for future speed dial
Speed Dial Select
*
SDS 497 Begins speed dial selection
StationSpeed Dial Codes SD
*
10-
*
49
Reserves key for station speed dial
System Speed Dial Codes SD
*
600-
*
999
Speed Dial number as set by port 000
Tone TONE 490 Exchange Line dial signals set tone or pulse
Start START 469
Tells system dialling is complete and to send the digits to
line
Sub Address SUB ADD 468
Allows DKT/EKT’s users to seperate the Dialled No. and
Sub-Address by pressing a feature key
Button Function
Button
Labels Code Notes
To Next Page
Loading...
