Program 60-8 Call Forward External (Remote Change, Security ID Code)
System & Station
Strata DK40 Programming Manual Spring 1999
3-111
Program 60-8 Overview
Changes a telephone’s External Call Forward destination from outside the system, the person
that wishes to change the destination must call into a DISA Exchange line, enter the
telephone’s [PDN] + &9:3 and then enter a security code plus the destination telephone
number. CF/EXT ID code must be assigned to a telephone to allow callers to change the Call
Forward-External destination of that telephone from a remote location by calling in on a
DISA Exchange line.
The security code (1~15 digits) for each telephone is set with this program.
Important!
To allow Call Forward External, Exchange lines must be enabled for the following:
◆ Two Exchange line connection in Program 10-1 and Program 15-5.
◆ Outgoing Access in Program 41 including DISA port numbers.
To Next Page
Loading...
