Toshiba Strata DK40 - Program 61-2 Fault Test Run Time

Program 61-2 Fault Test Run Time System & Station
Strata DK40 Programming Manual Spring 1999
3-113
Program 61-2
Fault Test Run Time
Program Type:
System
Initialised Default:
Initialised Data is Blank
Program 61-2 Overview
Determines at what time the test will be executed. There must be at least a one minute time
difference between Program 61-2 and Program 61-3. The time must be entered using the 24
hour clock system.
Program 61-3
Fault Test Report Time
Program Type:
System
Initialised Default:
Initialised Data is Blank
Program 61-3 Overview
Determines at what time the test report will be sent to the SMDR output. There must be at
least a one minute time difference between Program 61-2 and Program 61-3. The time must
be entered using the 24 hour clock system.
(QWHU 3URJ 0 RGH 0 6SNU 94+ROG 0 6SNU 5 +ROG 0 6SNU & & +ROG 0 6SNU & & +ROG
(QWHU 3URJ 0 RGH 0 6SNU 94+ROG 0 6SNU 6 +ROG 0 6SNU & & +ROG 0 6SNU & & +ROG
DATA = Time of Test (HHMM)
DATA = Time of Report to SMDR (HHMM)