System & Station
3-184
Strata DK40 Programming Manual Spring 1999
◆ Station assigned in Program 82 – ring after a 12-second delay for 12 seconds and
then stop ringing. Assign the appropriate [DN] or /LQH or 3RROHG /LQH *US
buttons to these ports using Program 39.
4. Assign any station to ring the AA Exchange lines in Program 83 (86 – Day 2, 89 –
Night). This assignment is only a flag that notifies the software to delay ring stations
assigned in Program 82. Program 83 station assignments do not ring.
◆ The station assigned in Program 83 will not ring because AA will answer the call
after 24 seconds. Assign [DN] buttons that flash/ring on this station port using
Program 39.
◆ No Delay: If AA line(s) are assigned to ring stations in Program 81, but no stations
are assigned in Programs 82 or 83, AA will answer the call immediately (no delay
ring).
◆ 12 Second Delay: If AA line(s) are assigned to ring stations in Programs 81 and 82
but no stations are assigned in Program 83, stations assigned in Program 81 will ring
immediately for 12 seconds and then the AA will answer (stations assigned in
Program 82 will not ring).
◆ 24 Second Delay: If AA Exchange line(s) are assigned to ring stations in Programs
81, 82, and 83, then the following ringing occurs:
Note
The Auto Attendant Answers after stations assigned in Program 81 and 82 stop
ringing (24 seconds from start of call).
5. Use Program 39 to assign the [DN] button that should flash and ring before the AA
answers. The [DN] button, or buttons for multiple [PDNs], must be assigned on all
station ports assigned to ring in Programs 81-89 only if the stations that must ring before
AA answers do not have the appropriate &2 /LQH or 3RROHG /LQH *US buttons.
Auto Attendant Program Example
◆
Exchange lines 1~5 should ring station 200 immediately for 24 seconds (6 rings).
◆
Exchange lines 1~5 should delay ring station 208 after ringing on station 200 for 12
seconds.
◆
The Auto Attendant should answer Exchange 1~5, 24 seconds after station 200 started
ringing and 12 seconds after station 208 started ringing. Stations 200 and 208 stop
ringing when auto attendant answers.
➤
To program the example
1. Assign lines 001~005 to AA in Program 78-61.
2. Assign lines 001~005 to ring station 200 in Program 81.
3. Assign lines 001~005 to ring station 208 in Program 82.
4. Assign lines 001~005 to ring any installed RSTU, PDKU, or PEKU port that has a
telephone or does not have a telephone connected in Program 83 assignment is used
only to enable Program 82 delay ring stations to ring.
To Next Page
Loading...
