Program 45-2 Toll Restriction Disable
Toll Restriction
Strata DK40 Programming Manual Spring 1999
4-13
Program 45-2
Toll Restriction Disable
Program Type:
Toll Restriction
Initialised Default:
All LED’s OFF for all Exchange lines (all lines apply Toll
Restriction)
Program 45-2 Overview
This program enables you to program lines to be exempt from any Toll Restrictions defined
in this section. Mark the exempt lines with an X on the record sheet. Toll Restrictions
disabled in this program override Station Toll Restrictions defined in Programs 48 & 49.
(QWHU 3URJ 0RGH 0 6SNU 78+ROG 0 6SNU 5 +ROG 0 6SNU & & +ROG 0 6SNU & & +ROG
Processor Exchange Line Range
DK40 001~012
LED Exchange Line X
12
012
11
011
10
010
09
009
08
008
07
007
06
006
05
005
04
004
03
003
02
002
01
001
LED’s/Buttons
Specify Exchange lines by setting LED Buttons as defined by
the table below. All LED’s with an X should be lit when finished.
ON = Disable Toll Restriction
SELECT = 2