Toshiba Strata DK40 - Figure 1-3 Programming Button Sequence Overview

How to Program a Strata DK40 System Overview
Strata DK40 Programming Manual Spring 1999
1-15
5. Exit the programming mode by pressing the same button sequence as in Step 4. This
sequence also never changes and is always shaded.
More Data
Another Program
Step 1
Enter Program Mode
Step 2
Enter Program Number
Step 3
Enter Program Data
Step 4
Exit Current Program
Step 5
Exit Program Mode
and/or
(LED Buttons)or
1697
Enter Prog Mode
Figure 1-3 Programming Button Sequence Overview