Strata DK40 Programming Manual Spring 1999
2-1
Initialisation & Test
2
This chapter gives you information on the Strata DK40’s Initialisation and Test programs.
The programs in this chapter are not given in numerical order, rather in order of importance.
These programs include:
◆ Program 91-9
System Initialisation
◆ Program 90
Initialise Programs 00~*99
◆ Program 91-1
Automatic PCB Recognition and Port Renumber
◆ Program 91-2
Data Transfer from Temporary Memory to Working Memory
◆ Program 92
Initialising Misc. Backup RAM
◆ Program 00
Software Check, Password Assignments, RAM Checksum and Power Cycle counter
Examples are also given for these programs - except Programs 91-2.
To Next Page
Loading...
