System & Station
Program 05 Flexible Access Code Numbering
3-10
Strata DK40 Programming Manual Spring 1999
Program 05 Overview
Program 05 enables you to change feature access codes. The first digit of a feature access
code can be changed to a different digit or to two digits. Digits after this prefix cannot be
changed. Some access codes cannot be changed (such as the code for Automatic Callback)
and are shown with N/A on the record sheet.
Notes
◆ Access code conflicts may exist if new access codes are assigned, and a new system
numbering plan will have to be implemented.
◆ Be sure access code changes do not conflict with existing access code or station
numbering schemes. Refer to “Program 04 Station Logical Port [PDN]
Assignment”.
◆ If access codes are being changed to a number that is currently assigned, change the
currently assigned code to an unused code first. In the initialised state, the only
unused code is zero (0).
6
Call Forward (#601, #602, #603, #604)
Timed Reminder (#605~#609)
M/W for Voice Mail ON (#63+Station No.)
M/W for Voice Mail OFF (#64+Station
No.)
Voice Mail ID Code Set (Call Fwd, #656)
Voice Mail ID Code Set (Ans. MW, #657)
LCD Message Set (#68)
DKT Mute Ring Adjust (#6101)
DKT Ring Level Adjust (#6102)
Port Swap/Station Relocation OFF
(#6281)
Station Relocation ON (#6282)
Logical Port Swap ON (#6283)
Call Forward Ext Set or Remote Change
Code (#670)
Date Set (#651)
Time Set (#652)
Weekday Set (#653)
T.R. Override Code Change (#654, #655)
System Speed Dial (N/A 600~699)
LCD User Name (#621-Set, #620-Reset)
TR dial plan Set #650
DISA Security Code Change (#658)
Verified Account Code Change (#659)
System LCD Messages (N/A 60-99)
Travelling Class Code 1~8 Change (#691~#698)
Logical Port Swap (#627 + Destination Intercom No.)
Physical Port Calling (#629 + Physical Port No.)
Set ID Lock Code (#673) Reset Lock ID Code (#674)
LCR Auth Codes 1-8 Set (#6751-#6758)
DDI Group Alpha Tagging (#671)ACD GROUP Alpha
Tagging (#672)
7
Exchange Line Outgoing Calls (#7001~#7012)
To store a Exchange line or feature access code in Speed Dial memory from rotary telephones or
telephones without the Speed Dial and Redial buttons, enter 44 + 7XXX instead of # + 7XXX.
Message Waiting Set/Cancel (N/A) (7) (77)
8
Exchange Group Outgoing Calls
(801~808)
9
Least Cost Routing or Exchange Group (9)
Default
Access
Code Features Affected (N/A = Not Affected/ Cannot Change)
New
Access
Codes
To Next Page
Loading...
