TOSHIBA
MESSAGES
MESSAGE WAITING
PROGRAMMABLE OPTION
1) The Message Center calls the station on intercom.
l If no answer, depress the
m
key on the
l Message Center EKT. This causes the
MW/FL
LED on the called station to illuminate.
l
MW/FL
LED at Message Center illuminates (will
go off when the connection is broken).
2)
Called station user lifts handset and depresses the
m
and
m
keys.
l
After receiving the message(s), hang up.
3) To clear the
MW/FL
LED at the called station,
depress the
m
key.
4) To clear the
MW/FL
LED from the Messaae Center.
call station and depress the
m
key twice.
PAGING
I
TO PAGE
1) Lift the handset.
2) Depress the
m
key and dial the following:
mm=
All Call
-*.*.,.
..-.
.
.-a-
3)
Mak!“your
announcement in a normal voice level
and repeat it.
4) Hang up when you have completed your announce-
ment.
I
“Programmable Option
iI=
Group
#1
ID=
Group
#2
Pi=
Group
#3
Group
#4
All Call
!with
External Page)*
FvtPrnnl
Pans
To Next Page
Loading...
